Sunday 07 May 2006 11:13:36 pm

You should increase the maximum execution time for PHP. You can do it by changing the php.ini file. Change this line:

max_execution_time = 30

and set the value of at least 120. It could also be usefull to increase the memory limit:

memory_limit = 8M

to at least 256M. (also in php.ini)

If this doesn't solve the problem then try getting a faster computer :)

--
Nothing is impossible. Not if you can imagine it!

Hubert Farnsworth

Saturday 16 June 2007 7:23:29 pm

I'm trying to install eZ Publish 3.9.2 on my local PC.

Installation Package: ezpublish-3[1].9.2_installer.exe
OS: Windows XP
CPU: 500M Intel Celeron
Memory: 256M

I meet the similar problem:

Fatal error: Maximum execution time of 600 seconds exceeded in c:\...\xxx.php on line xxx
Fatal error: eZ publish did not finish its request

I use xxx because the file name and the line number is different every time while I install.

I change the php.ini to

max_execution_time =3600
max_input_time = 600
memory_limit =64M

But it's no efect.

Any help will be deeply appreciated.

<b>Thanks!</b>

☆．．·°∴°．☆°°．☆°．
°∴ °☆ ．·enjoy star° ．·★°∴°
∴°．°★ ．·°
　 ミ☆°∴°．★☆° ∴·°
°．☆° ．·∴°　

Is it a pleasure after all to practice in due time what one has learnt?

Sunday 17 June 2007 11:53:29 pm

Thanks, André R.

I restarted windows in order to refresh apache according to your suggestions but on effect. Maybe my computer is too old to run this program.

I have installed the eZ Publish 3.9.2 on a better linux computer successfully. Thanks again for your help.

☆．．·°∴°．☆°°．☆°．
°∴ °☆ ．·enjoy star° ．·★°∴°
∴°．°★ ．·°
　 ミ☆°∴°．★☆° ∴·°
°．☆° ．·∴°　

Is it a pleasure after all to practice in due time what one has learnt?

Friday 16 November 2007 3:31:58 pm

There's something wrong with the Windows installer... (ezpublish-3.10.0_installer.exe)

max_execution_time =3600  
max_input_time = 3600
memory_limit =600M

and still no go... and on a pretty recent Core 2 Duo with 1GB of RAM
also the php.ini is placed in the root windows folder...

Cancel that... a different error appears after changing the php.ini settings.

Friday 07 November 2008 9:13:16 am

Greetings.
Nothing else for me but add a comment to this post.
Trying to install eZ Publish 4.0, and haven't been able to do it with the "Website Interface (ver. 1.3-1)" (will have to try the "Plain site").
Everything seems right. When I get to the "Site registration" section, this is what "Comments" shows:

Site info:

  Site package  - ezwebin_site
  Title         - Website Interface XXX
  URL           - http://localhost/ezpublish/index.php/ezwebin_site
  Admin URL     - http://localhost/ezpublish/index.php/ezwebin_site_admin
  Access type   - url
  Access value  - ezwebin_site


Web server info:
Version - Apache/2.2.6 (Win32) DAV/2 mod_ssl/2.2.6 OpenSSL/0.9.8e mod_autoindex_color PHP/5.2.4

PHP info:
Version - 5.2.4

OS info
Name - Windows NT BELG-II 5.1 build 2600

Database info:
Type - PostgreSQL
Driver - ezpostgresql


Email info:
Transport - SMTP

Image conversion:
ImageMagick was found and used.
Path - c:\program files\imagemagick
Executable - convert.exe
ImageGD extension was found and used.

Regional info:
Primary - eng-US
Additional - fre-FR, ita-IT, eng-US

Critical tests

directory_permissions - Success
phpversion - Success
database_extensions - Success
image_conversion - Success
open_basedir - Success
safe_mode - Success
memory_limit - Success
execution_time - Success
magic_quotes_runtime - Success
allow_url_fopen - Success
accept_path_info - Success
php_session - Success
file_upload - Success
zlib_extension - Success
dom_extension - Success
timezone - Success

Other tests:

php_magicquotes - Success
mbstring_extension - Success
imagegd_extension - Success
imagemagick_program - Success
database_all_extensions - Success
php_register_globals - Success
texttoimage_functions - Success

I did uncheck "Send registration" so it would take less time.

XAMPP shows these lines for the Configuration - PHP Core:

max_execution_time	3600	3600
max_input_nesting_level	64	64
max_input_time	60	60
memory_limit	512M	512M

My values for the php.ini Apache file is:

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 3600     ; Maximum execution time of each script, in seconds
max_input_time = 60	; Maximum amount of time each script may spend parsing request data
memory_limit = 512M      ; Maximum amount of memory a script may consume (16MB)

Being like that and all, I keep getting this error:

Fatal error: Maximum execution time of 600 seconds exceeded in C:\xampp\htdocs\ezpublish\lib\ezdb\classes\ezpostgresqldb.php on line 168

Fatal error: Maximum execution time of 600 seconds exceeded in C:\xampp\htdocs\ezpublish\lib\ezutils\classes\ezexecution.php on line 144

I'm not sure if I'm missing some pre-install configuration step, or it's just that my PC is too slow for eZP.

MS Windows XP, Home Edition, Version 2002, SP3.
Intel Celeron CPU 2.40GHz
2.39 GHz, 1.49 GB of RAM

Maybe the answer is around this forum, but haven't found it yet.
This error is pretty disturbing, though.
Hope can get some help and solve this error.

ß.

Friday 07 November 2008 10:35:42 am

@ Björn Dieding@xrow.de

Thanks so much for the prompt answer.
I was affraid it was something like that. I guess now I have more to add to Santa's list.

Best regards.

ß.

Wednesday 07 January 2009 7:24:17 am

Well here is the answer to all of you who are seeing no changes to their php installation when they have obviously made a change to the php.ini file.

The PHP installation looks for the php.ini file in you windows root directory. In most cases that would be "C:\WINDOWS". I went to http://php.net and searched on "trouble windows php.ini" for all "php.net sites" and took the second listing there. This is the direct link to the discussion there.

http://php.net/manual/en/install.windows.iis.php

Hopefully this will help you with the time zone settings as well as the timing and memory allocation entries.

Wednesday 07 January 2009 9:48:19 am

One more point for those of you who are Vista with UAC turned on. The file php.net was difficult to change to the new content/settings for the PHP system.

In order to make the change I opened php.net in the text editor. I then made those changes and saved the file as php.net.txt on my desktop.

In the Start pop up menu of Windows Vista there is an entry field called "start search". I typed the "php.ini" into that field. I then deleted all files showing in that search results and ignored all that appeared in the search result which did not match exactly "php.ini".

I then rebooted, rechecked the same search and then I opened my copy of php.ini.txt on my desktop in the text editor. I did a "save as" from the text editor and confirmed all of the UAC messages. I then shut down the text editor.

I redid the search again and hopefully at this point you would see two entries in the result of that search. Each will be "php.ini.txt". One of those files will be the one on your desktop the other will be in the "c:\windows" directory. I then right clicked on the one in the "c:\windows" directory and dropped down to the "open file location" choice. The window that opened had the file highlighted. I renamed that file to "php.ini".

I am sure there might have been an easier way to do this but it was a trial and error for my process. Those of you who don't have to deal with UAC just don't understand even though you may have some thread of compassion.

I hope this helps......

Thursday 25 June 2009 12:55:05 am

hihi

Tuesday 13 April 2010 5:54:58 am

Usual advice applies.

1. Check your php.ini

2. Create a phpinfo() file and check that the values you think are set in php.ini actually show up in the file are the same, if not then phpinfo() will tell you the real location of you php.ini file.

3. Restart apache

4. Check permissions of your var directory

5. If you receive white screens during installation your script ran out of memory, increase script memory limits in php.ini

6. If you run into timeout issues during at the package selection screen of the installation process there is a good chance your system can't remotely fetch packages.

7. If you run in timeout issues at language selection in installation just upgrade.

8. If you receive high CPU usage and timed out scripts in eZ Publish 4.2 or lower try using 4.3, this can occur when trying to instantiate a new object through eZContentClass without a valid user (ugly ugly problem which is resolved in 4.3). You shouldn't see this unless you are installing sso handlers or other extensions that drop in before users are set.

9. Don't use Windows, are you asking for trouble?

10. Unless you are specifically supporting a client on an older version - there is no real excuse for running anything more than 2 general releases old. You should be using 4.2 or 4.3 now.

Andrew Duck, Executive Director, Quiqcorp Limited
eZ Certified Developer and Trainer.
Member of the Community Project Board
http://quiqcorp.com | http://twitter.com/andrewduck